TRICONEX 1600071-001 Digital Security Input Module

TRICONEX 1600071-001 Digital Security Input Module

Specific Parameters​

Electrical Parameters​

Operating Voltage: 24V DC, compatible with standard power supply for industrial safety circuits​

Input Channels: 8 digital input channels, supporting independent signal acquisition​

Input Type: Compatible with DC and AC input signals, adapting to multi-scenario equipment access​

Input Voltage Range: 24V DC or 110V AC to 240V AC, dual-range optional​

Input Resistance: 4.7kΩ, ensuring stable signal transmission​

Input Sensitivity: 1V DC or 1V AC, accurately identifying weak signals​

Safety Architecture: Triple Modular Redundancy (TMR) system, implementing Hardware-Integrated Fault Tolerance (HIFT) and voting functions​

Event Recording: Supports 1ms SOE event recording, meeting fault traceability requirements​

Communication Protocols: Compatible with Modbus, Ethernet, fieldbus, enabling multi-system data interaction​

Insulation Resistance: ≥100MΩ between input and backplane (measured at 500V DC, normal temperature and state)​

Voltage Withstand Strength: ≥2500V AC between input and ground, no breakdown for 1 minute, leakage current ≤1mA​

Power Consumption: Typical operating power consumption ≤3W, full-load power consumption ≤5W​

Mechanical Parameters​

Overall Dimensions: 137mm (L) × 53mm (W) × 140mm (D), compact module design​

Weight: Approximately 0.5kg, compatible with TRICONEX standard I/O rack installation​

Mounting Method: Plug-in installation, compatible with TRICON series safety system rack rails​

Housing Material: Flame-retardant engineering plastic, with chemical corrosion resistance and electromagnetic shielding properties​

Connection Method: Screw-type terminal block, compatible with ≤1.0mm² wires​

Protection Rating: IP20, suitable for dry environment inside control cabinets​

Status Indication: Module-level green LED (normal operation), red LED (fault alarm)​

Environmental Parameters​

Operating Temperature: -40℃ to 70℃, operation without derating​

Storage Temperature: -40℃ to 85℃, meeting extreme storage and transportation requirements​

Relative Humidity: 5% to 95% (non-condensing), suitable for high-humidity industrial scenarios​

Vibration Resistance: 10-500Hz frequency range, 1.0g acceleration (sine wave), no structural loosening​

Shock Resistance: 15g acceleration (half-sine wave, duration 11ms), ensuring mechanical stability​

EMC Compliance: Meets EN 55014-1 (emission limits), EN 55014-2 (immunity)​

Installation Altitude: Normal operation ≤2000m, power derating 10% for every 1000m increase above 2000m​

Product Performance​

High safety and reliability: TMR redundancy architecture can tolerate single-channel faults, with system fault-free operation probability up to 99.99%​

Optimized channel density: 8-channel input design adapts to compact control cabinets, improving space utilization​

Accurate signal acquisition: Wide-range input voltage and high-sensitivity design, signal recognition accuracy ≥99.9%​

Comprehensive fault diagnosis: Supports channel open circuit and short circuit fault detection, diagnostic coverage ≥99%​

Accurate event traceability: 1ms SOE recording can clearly restore fault occurrence sequence, facilitating rapid troubleshooting​

Strong integration compatibility: Seamless connection with TRICON safety controllers, supporting data interaction with DCS systems​

Excellent environmental adaptability: Wide temperature and vibration-resistant design, adapting to harsh working conditions such as chemical workshops and offshore platforms​