MOTOROLA AET-3047 Ethernet switch

MOTOROLA AET-3047 Ethernet switch

SPECIFIC PARAMETERS​

Brand MOTOROLA​

Product Series AET Series Industrial-grade Ethernet Switches​

Product Type Industrial-grade Redundant Ethernet Switch​

Model AET-3047​

Port Configuration 24 10/100Mbps Auto-negotiation Ethernet Electrical Ports 4 Gigabit SFP Optical Ports (Expandable)​

Network Protocols Supports IEEE 802.3/IEEE 802.3u/IEEE 802.3ab Supports STP/RSTP/MSTP Spanning Tree Protocol Supports VLAN Division Supports QoS Quality of Service Supports IGMP Snooping Supports SNMP v1/v2/v3 Network Management Protocol​

Working Voltage Wide-range DC Input 24-48VDC ±10% Supports Dual Power Supply Redundancy Input​

Working Temperature -40℃ to 75℃​

Storage Temperature -55℃ to 90℃​

Relative Humidity 5% to 95% Non-condensing (No Dew Formation)​

Protection Level IP40 (DIN Rail Installation)​

Installation Method DIN Rail Installation/19-inch Rack Installation (Dual Adaptation)​

Size 130mm×190mm×60mm (Length×Width×Height)​

Weight 1.2kg​

Power Consumption Typical 30W Maximum 40W​

Certification Qualification CE UL IEC 61010-1 IEC 61850-3 EN 55032​

Compatible System Industrial DCS/SCADA Systems Rail Transit TCMS Systems Distributed Control Systems Industrial Internet of Things Platforms​

Diagnostic Functions Real-time Monitoring of Port Link Status Power Failure Alarm Redundant Link Switching Status Feedback Temperature Abnormality Monitoring Network Storm Suppression​

Anti-interference Level Complies with EN 61000-6-2/EN 50121-3-2 Industrial and Rail Transit EMC Standards​

Vibration and Shock Resistance Complies with IEC 61373 Class 2 Standard​

MTBF (Mean Time Between Failures) ≥1,000,000 Hours​

Housing Material Flame-retardant ABS+Metal Shielding Housing Fully Sealed Structure​

Heat Dissipation Method Natural Heat Dissipation Fanless Design​

Redundancy Functions Supports Dual Power Supply Redundancy Supports Link Aggregation (LACP) Supports Rapid Redundancy Protocols (MRP/HSR)​

Data Forwarding Rate Fast Ethernet Ports Wire-speed Forwarding Gigabit Ports Wire-speed Forwarding​

Packet Forwarding Rate 6.5Mpps (Full Wire-speed)​

Buffer Capacity 4MB​

Maximum MAC Address Table 8K​

PRODUCT PERFORMANCE​

Adopts 24 electrical ports + 4 optical ports hybrid configuration, supporting collaborative transmission of 100M electrical signals and 1G optical signals, adapting to the intensive interconnection needs of wired equipment in industrial sites, improving network expansion flexibility​

Supports STP/RSTP/MSTP spanning tree protocol and MRP/HSR rapid redundancy protocol, link switching time ≤50ms, ensuring uninterrupted communication of industrial control networks​

Dual power supply redundancy input design, supporting 24-48VDC wide-range power supply, can resist on-site power supply fluctuations and single power supply failures, improving equipment operation reliability​

Industrial-grade wide-temperature adaptability, can work stably in the temperature range of -40℃ to 75℃ and 5%-95% non-condensing humidity environment, withstanding extreme working conditions such as alpine, high temperature and high humidity​

Metal shielding housing and fully sealed structure, with extremely strong anti-electromagnetic interference and dust resistance, meeting the usage requirements of industrial sites with strong interference and high dust​

Fanless natural heat dissipation design, avoiding mechanical failures and dust accumulation, extending equipment service life, adapting to industrial installation scenarios without forced ventilation​

Supports VLAN division and QoS quality of service guarantee, can prioritize industrial control data, ensuring priority transmission of key control commands​

Compatible with SNMP v1/v2/v3 network management protocols, supporting remote monitoring of port status, configuration of network parameters and fault alarms, reducing operation and maintenance costs​

Supports Link Aggregation (LACP) function, which can bind multiple ports into a logical link, improving network bandwidth and transmission stability​

Seamlessly compatible with industrial DCS/SCADA systems and rail transit TCMS platforms, no additional adaptation software required, simplifying industrial network integration processes​