GE WES5302-150 Ethernet switch

GE WES5302-150 Ethernet switch

SPECIFIC PARAMETERS​

Brand GE​

Product Series Industrial Network WES Series High-end Enhanced Full Gigabit Managed Switch​

Product Type Industrial-grade Full Gigabit Full-function Managed Ethernet Switch​

Model WES5302-150​

Working Voltage 24VDC Wide Range Adaptation 18-36VDC​

Working Temperature -40℃ to 75℃​

Storage Temperature -55℃ to 85℃​

Relative Humidity 5% to 95% Non-condensing (No Dew Formation)​

Protection Level IP40 (Rail-mounted Installation, Sealed Dustproof Design)​

Installation Method 35mm DIN Rail Installation​

Port Configuration 8 10/100/1000BASE-TX Gigabit Electrical Ports (POE+ Optional) 4 1000BASE-SX/LX/ZX Gigabit Optical Ports (SFP Slots, Supports Single-mode/Multi-mode/Long-haul Switching)​

Transmission Rate 10Mbps/100Mbps/1000Mbps Auto-negotiation​

Network Protocols IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3z IEEE 802.1Q (VLAN) IEEE 802.1w (RSTP) IEEE 802.1s (MSTP) IEEE 802.1p (QoS) IEEE 802.3ad (LACP)​

Redundancy Protocols Support RSTP/MSTP Link Aggregation (LACP) Ring Redundancy (Self-healing Time ≤12ms) Dual-link Backup Redundant Power Management​

Switching Capacity 48Gbps​

Packet Forwarding Rate 35.7Mpps​

Buffer Capacity 16MB​

Management Functions Supports SNMP v1/v2c/v3 Web Management CLI Command Line Management Port Mirroring Flow Control QoS Priority Classification Port Security Storm Suppression Link Diagnosis Firmware Online Upgrade​

Power Configuration Dual Redundant Power Input (Reverse Polarity Protection + Overvoltage/Overcurrent Protection)​

Current Consumption Typical 280mA (24VDC) Maximum 420mA (24VDC)​

Size 140mm×110mm×55mm (Length×Width×Height)​

Weight 1.3kg​

Power Consumption Typical 6.7W Maximum 10.1W​

Certification Qualification CE UL CSA IEC 61010-1 IEC 61850-3 IEC 61508 SIL 2 EN 55032 Class A ATEX Zone 2​

Compatible System GE PACSystems RX3i/RX7i/RX9i Controllers Proficy iFIX/SCADA Proficy Plant Applications Third-party PLC/SCADA Industrial Ethernet-compatible Devices​

Diagnostic Function Support Port Status LED Indication Link Fault Alarm Power Supply Fault Detection Ring Network Status Monitoring Traffic Statistics Module Self-diagnosis Cable Diagnosis Optical Port Power Monitoring​

Anti-interference Level Complies with EN 55032/EN 55035/EN 61000-6-2/EN 61000-6-4 Industrial EMC Standards​

MTBF (Mean Time Between Failures) ≥480,000 Hours​

PRODUCT PERFORMANCE​

Full Gigabit port combination design, 8 electrical ports adapt to high-density interconnection of short-distance equipment, 4 multi-functional SFP optical ports support flexible switching of single-mode/multi-mode/long-haul, meeting the needs of long-distance transmission and cross-area interconnection of backbone networks​

Dual redundant isolated power input with reverse polarity, overvoltage and overcurrent dual protection ensures power supply continuity and safety, avoids network interruption caused by single-point power failure, and improves system redundancy reliability​

Supports enhanced ring network redundancy protocol with self-healing time ≤12ms, combined with LACP link aggregation and dual-link backup functions, building a highly stable backbone network architecture without single point of failure​

Switching capacity up to 48Gbps and packet forwarding rate of 35.7Mpps, with super large concurrent data throughput capacity, ensuring no congestion in collaborative communication of ultra-large-scale equipment and real-time transmission of control commands and monitoring data​

Integrates three management methods: SNMP v1/v2c/v3, Web management and CLI command line, supports port security, refined QoS priority classification and storm suppression, realizing full-link network management and control​

Industrial-grade wide-temperature sealed design, can operate stably in the temperature range of -40℃ to 75℃ and non-condensing humidity environment of 5%-95%, adapting to extreme industrial scenarios such as alpine, high temperature, high humidity and high dust​

IP40 protection level with high-strength sealed metal shell, featuring dustproof, anti-vibration, anti-electromagnetic radiation and anti-corrosion performance, can be directly installed in industrial site cabinets or rails without additional protection​

Built-in comprehensive intelligent diagnostic functions such as cable diagnosis, optical port power monitoring and module self-diagnosis, fault information is fed back to the network management platform in real time, facilitating rapid location of network problems and reducing operation and maintenance costs​

35mm standard DIN rail installation design, compact structure, easy to install and disassemble, adapting to the standardized cabinet layout of industrial sites, saving installation space and costs​

Wide-range 18-36VDC power supply design, withstanding voltage fluctuations and transient sags, adapting to complex industrial power grid environments, ensuring continuous and stable operation of the device​

Seamlessly compatible with GE PACSystems full-series controllers and Proficy software platforms, can be quickly integrated into GE industrial automation ecosystem, and supports interconnection with third-party equipment, reducing system integration complexity​