GE WES5162-9101 Industrial Ethernet Switches

GE WES5162-9101 Industrial Ethernet Switches

SPECIFIC PARAMETERS​

Brand GE​

Product Series Industrial Network WES Series Full Gigabit Managed Switch​

Product Type Industrial-grade Full Gigabit Managed Ethernet Switch​

Model WES5162-9101​

Working Voltage 24VDC Wide Range Adaptation 18-36VDC​

Working Temperature -40℃ to 75℃​

Storage Temperature -55℃ to 85℃​

Relative Humidity 5% to 95% Non-condensing (No Dew Formation)​

Protection Level IP40 (Rail-mounted Installation)​

Installation Method 35mm DIN Rail Installation​

Port Configuration 16 10/100/1000BASE-TX Gigabit Electrical Ports 2 1000BASE-SX/LX Gigabit Optical Ports (SFP Slots)​

Transmission Rate 10Mbps/100Mbps/1000Mbps Auto-negotiation​

Network Protocols IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3z IEEE 802.1Q (VLAN) IEEE 802.1w (RSTP) IEEE 802.1s (MSTP)​

Redundancy Protocols Support RSTP/MSTP Link Aggregation (LACP) Ring Redundancy (Self-healing Time ≤20ms)​

Switching Capacity 36Gbps​

Packet Forwarding Rate 26.78Mpps​

Buffer Capacity 8MB​

Management Functions Supports SNMP v1/v2c/v3 Web Management Port Mirroring Flow Control QoS Priority Classification​

Power Configuration Dual Redundant Power Input​

Current Consumption Typical 220mA (24VDC) Maximum 320mA (24VDC)​

Size 140mm×110mm×55mm (Length×Width×Height)​

Weight 1.1kg​

Power Consumption Typical 5.3W Maximum 7.7W​

Certification Qualification CE UL CSA IEC 61010-1 IEC 61850-3 EN 55032 Class A​

Compatible System GE PACSystems RX3i/RX7i Controllers Proficy iFIX SCADA Systems Industrial Ethernet-compatible Devices​

Diagnostic Function Support Port Status LED Indication Link Fault Alarm Power Supply Fault Detection Ring Network Status Monitoring Traffic Statistics​

Anti-interference Level Complies with EN 55032/EN 55035/EN 61000-6-2 Industrial EMC Standards​

MTBF (Mean Time Between Failures) ≥400,000 Hours​

PRODUCT PERFORMANCE​

Full Gigabit port configuration, combination of 16 electrical ports and 2 optical ports, supporting single-mode/multi-mode SFP module adaptation, meeting the needs of large-scale equipment short-distance interconnection and long-distance transmission​

Dual redundant power input design ensures power supply continuity, avoids network interruption caused by single-point power failure, and improves system reliability​

Supports RSTP/MSTP redundancy protocol and LACP link aggregation function, ring network self-healing time ≤20ms, building a highly stable redundant network to resist single point of failure in links​

Integrates SNMP v1/v2c/v3 protocol and Web management interface, supporting centralized network management and local configuration, enabling batch device monitoring, parameter adjustment and fault diagnosis​

Industrial-grade wide-temperature tolerance capability, can operate stably in the temperature range of -40℃ to 75℃ and non-condensing humidity environment of 5%-95%, adapting to extreme industrial scenarios such as alpine, high temperature and high humidity​

IP40 protection level with metal ruggedized shell, featuring dustproof, anti-vibration and anti-electromagnetic radiation performance, can be directly installed in industrial site cabinets or rails without additional protection​

36Gbps switching capacity and 26.78Mpps packet forwarding rate, ensuring no congestion in large-scale concurrent data transmission, guaranteeing real-time interaction of control commands and monitoring data​

Compatible with IEEE 802.1Q VLAN protocol and QoS priority classification, supporting port isolation, broadcast storm suppression and traffic grading, optimizing network bandwidth occupancy and improving communication security​

Port mirroring function facilitates network fault tracing and data traffic analysis, reducing operation and maintenance complexity and shortening problem troubleshooting time​

35mm standard DIN rail installation design, easy to install and disassemble, adapting to the standardized cabinet layout of industrial sites, saving installation space​

Wide-range power supply design, withstanding 18-36VDC voltage fluctuations and transient sags, adapting to complex industrial power grid environments, ensuring continuous and stable operation of the device​

Compatible with GE PACSystems controllers and Proficy software platforms, can be seamlessly integrated into GE industrial automation ecosystem, reducing system integration costs​