GE SLN042 IC086SLN042-A Digital input/output integrated module

Specific Parameters

Electrical Parameters
Supply Voltage: 24V DC ±10%, supporting 18-30V DC wide-range input
Channel Configuration: 8 digital inputs, 8 digital outputs, independent channel isolation
Input Parameters:
Signal Type: Active signal (configurable PNP/NPN)
Voltage Range: 0-5V DC (low level), 15-30V DC (high level)
Input Current: Typical 3mA (at 24V DC)
Filter Time: 0.1ms-100ms adjustable
Output Parameters:
Output Type: Transistor output (NPN)
Rated Load: 1A@30V DC
Switching Frequency: Up to 1kHz
Isolation Level: 2.5kV AC between channels (1 minute), 2kV AC between channels and system (1 minute)
Protection Functions: Input overvoltage protection (≤35V DC), output short circuit protection, reverse polarity protection
Power Consumption: ≤6W under normal operation
Environmental Parameters
Operating Temperature: -40°C to 70°C
Storage Temperature: -45°C to 85°C
Relative Humidity: 5% to 95% (non-condensing, no dew formation)
EMC Immunity: Compliant with EN 61326-1 industrial grade standard
Vibration Resistance: 10-500Hz, 10g acceleration (compliant with IEC 60068-2-6)
Shock Resistance: 30g acceleration, 11ms duration (compliant with IEC 60068-2-27)
Mechanical Parameters
Dimensions: 35mm (W) × 100mm (H) × 120mm (D)
Weight: Approximately 300g
Mounting Method: 35mm standard DIN rail (compliant with EN 60715)
Protection Class: IP20 (module itself)
Housing Material: Flame-retardant engineering plastic (UL 94 V-0 grade)
Terminal Type: Spring-loaded crimp terminals, compatible with 16-22 AWG wires

Product Performance

The input channels support 0.1ms-100ms adjustable filtering, which can accurately filter electromagnetic noise in industrial sites, with input response time ≤1ms to ensure no delay in signal acquisition. The output adopts transistor switch design, with switching response time ≤10μs, supporting 1kHz high-frequency switching action to meet fast control needs.

Integrated with channel-level self-diagnostic system, it real-time monitors input open/short circuit, output overload/short circuit and module power abnormalities, with fault diagnosis coverage ≥99%. Fault information is uploaded to the controller in real time via bus, and channel status is intuitively fed back with LED indicators.

Independent channel isolation and anti-interference circuit design provide common mode rejection ratio ≥120dB, maintaining signal stability in strong electromagnetic interference environments. Fully compatible with GE VersaMax, RX3i and other series controllers, supporting online configuration of channel parameters via Proficy Machine Edition software, enabling maintenance without shutdown. The mean time between failures (MTBF) is ≥400,000 hours, meeting continuous production needs.

Show More Show Less