GE IC670MDL740J 16 channel discrete output module

Specific Parameters

Number of Output Channels: 16
Output Voltage Range: 9.2 – 29.5VDC
Nominal Output Voltage: 24VDC
User Output Current: 0.5 amperes per point, with a maximum total output current of 4 amperes for the module
Current Drawn from the Bus Interface Unit (BIU) Power Supply: 111mA
Output Response Time: Typically 200ms for a 0.5A resistive load
Output Voltage Drop: Maximum 0.5 volts
Output Leakage Current: 0.5mA at 30VDC
Minimum Load Current: 1mA per point
Surge Current: Rated 2 amperes, with a maximum duration of 100ms
Operating Temperature Range: 0°C to 55°C
Relative Humidity Range: 5% to 95% (non – condensing)
Electrical Isolation: Isolation measures are provided between the output and logic, and between the output and frame ground
Terminal Specifications: It consists of 25 terminals in an integrated terminal block. Each terminal can terminate one wire of AWG #14 – AWG #22, or two wires when using AWG #22 wire. After installing an external jumper, the allowable wire size is AWG #14 to AWG #16
Fuse Specifications: A 5 – ampere fuse is equipped inside the module to connect to the external power supply. A slow – blow fuse with a rated current of 5 amperes and a rated voltage of 250 volts AC is recommended
Status Indication: Each output channel is equipped with a separate LED status indicator to show the on/off state; there is a common fuse for the entire I/O group, and an LED indicator is provided to show the fuse blown status
Dimensions: 110mm in length, 66.8mm in width, and 50mm in height (for reference only, subject to the actual product)
Installation Method: Supports DIN rail installation

Product Performance

Stable and Reliable Output Drive: It can output stably within the voltage range of 9.2 – 29.5VDC, providing 0.5 amperes of current per point. It can effectively drive external devices with low rated current, such as indicator lights, relay coils, solenoid – driven devices, etc. In a complex industrial electromagnetic environment, it can still ensure the stability and accuracy of the output signal, ensuring the stable operation of the equipment.
Complete Status Monitoring and Fault Protection: Through the LED status indicator of each channel, operators can intuitively and real – time grasp the working status of each output channel; the common fuse and its corresponding LED indicator can promptly indicate the fuse blown fault, and the fuse can prevent damage to the module caused by reverse connection of the external power supply polarity and excessive output current. At the same time, the module can also send the fuse blown diagnostic message to the bus interface unit, facilitating the system to quickly locate and handle faults, improving system reliability.
Good Environmental Adaptability: With an operating temperature range of 0°C to 55°C and a relative humidity range of 5% to 95% (non – condensing), it can adapt to the temperature and humidity conditions of most conventional industrial environments, ensuring the continuous and stable operation of the module in different working environments.
Convenient Installation and Maintenance: It adopts the DIN rail installation method, which is simple and fast, and easy to layout and install in the industrial control cabinet; at the same time, the intuitive layout of the module and complete documentation provide convenience for later maintenance work, reducing maintenance difficulty and cost.