Bently Nevada 3500/72M-01-00 176449-08 140471-01 Piston rod position monitoring module and supporting components

Specific Parameters

BrandBently Nevada (Bently Nevada, USA)

Product Series Bently Nevada3500 Series

Product Type Industrial-Grade Reciprocating Rod Position Monitoring Module, Monitoring Component, Industrial Control Original Spare Part

Model Bently Nevada3500/72M-01-00, Bently Nevada176449-08, Bently Nevada140471-01

Country of Origin USA (all produced by Bently Nevada original factory)

Compatible Devices Bently Nevada 3500 Frame System, Eddy Current Transducers, Reciprocating Compressors, Gas Turbines, Industrial Control Hosts, Condition Monitoring Systems

Input Signal 1 to 4 Eddy Current Transducer Signals

Input Impedance 10kΩ

Rated Sensitivity Rod Position, Rod Drop, Hyper-Compressor Measurement: 3.94mV/µm (100mV/mil) or 7.87mV/µm (200mV/mil)

Rated Power Consumption 3500/72M-01-00: 7.7W

Transducer Power Supply -24VDC

Output Type Buffered Transducer Output, one coaxial connector per channel (with short-circuit protection)

Output Impedance 550Ω

Measurement Functions Rod Position Measurement, Rod Drop Measurement, Hyper-Compressor Measurement (channels programmed in pairs, up to 2 functions can be completed)

Frequency Response 1X and 2X Vectors and Non-1X Parameters: Effective when machine speed is between 60cpm and 2000cpm

Peak-Peak Filter 1Hz to 600Hz

Gap Filter -3dB at 0.09Hz

Non-1X Filter Constant Q Band-Reject Filter, within 60cpm to 15.8 times the speed frequency range, the minimum frequency in the stopband is 34.9dB

1X/2X Vector Filter Constant Q Filter, the minimum stop frequency in the stopband is 57.7dB

Measurement Accuracy Displacement Value, Gap, Instantaneous Probe Gap, 1X/2X Amplitude: Typically within ±0.33% of full scale, maximum ±1.0%; Non-1X Amplitude: Typically within ±3.0% of full scale; Position Crank Angle, Rod Position Angle: Typically within ±1°, maximum ±3°

Alarm Function Warning alarm points can be set for each measurement value, and dangerous alarm points can be set for any two measurement values. The alarm accuracy is within 0.13% of the required alarm value

Alarm Delay Warning: 1 to 60 seconds, 1-second interval; Danger: 1 to 60 seconds, 1-second or 0.1-second interval (rated)

Status Indication OK LED (Normal Operation), TX/RX LED (Communication Status), Bypass LED (Bypass Mode)

Protection Type Electromagnetic Interference Protection, Short-Circuit Protection, Channel Failure Protection

Operating Temperature Range When used with I/O modules: -30℃ to +65℃; When used with displacement/velocity acceleration internal barrier I/O modules (internal terminals): 0℃ to +65℃

Storage Temperature Range -40℃ to +85℃

Relative Humidity 5% to 95%, Non-Condensing

Electromagnetic Compatibility Emission: EN 55011, Class A; Conduction: EN 55011, Class A; Electrostatic Discharge: EN 61000-4-2, Standard B, etc. (Compliant with EN50081-2, EN50082-2)

Physical Dimensions 3500/72M-01-00: Standard 3500 Series Module Dimensions, suitable for 3500 Frame Mounting

Mounting Method 3500 Frame Rack Mounting

Special Functions Signal Processing, Dynamic/Static Position Measurement, Programmable Alarm, LED Status Indication, Signal Buffer Output, Channel Pair Programming

Product Material High-Quality Industrial Flame-Retardant Board

Customizable No

Certification Standards EN50081-2, EN50082-2, EN55011, EN61000 Series, EN61010-1

Warranty Period 12 Months

Product Performance

All three products are originalBently Nevada spare parts, which work together to be compatible withBently Nevada 3500 frame system and various key equipment such as reciprocating compressors and gas turbines. They are stably powered, easy to install and maintain, can quickly realize accurate monitoring of rod position, rod drop and hyper-compressor status, are easy to replace, can quickly restore the system monitoring function, and ensure the safe and continuous operation of industrial equipment.

Equipped with a dedicated signal processing chip, it can stably receive 1 to 4 eddy current transducer signals, with high measurement accuracy. The sensitivity can be flexibly configured according to the rod material, and it can accurately process dynamic and static position parameters, generate key data such as peak-peak displacement, gap, and 1X/2X amplitude, meeting the high-precision requirements of industrial equipment condition monitoring.

Supports 3500 frame configuration software programming, channels can be configured in pairs, up to two monitoring functions can be realized, integrates a complete alarm mechanism, alarm points can be flexibly set, and alarm delay can be accurately programmed, which can timely feedback equipment abnormalities, provide reliable support for equipment protection, and avoid equipment damage.

Adopting industrial-grade flame-retardant board for reinforced packaging, it has strong anti-electromagnetic interference ability, complies with a number of international electromagnetic compatibility standards, has strong adaptability to wide temperature environment, can operate stably for a long time in industrial environments from -30℃ to +65℃, suitable for harsh heavy industrial scenarios with high dust and high interference. Key components have passed strict screening and have a long service life.

It has complete LED status indication, fault diagnosis and signal buffer output functions, which can feedback module operation status, communication status and bypass mode in real time, facilitating maintenance personnel to quickly locate and troubleshoot problems. The modular design is convenient for system expansion and maintenance, and can complete expansion without major modifications to the existing monitoring system, adapting to the needs of industrial equipment monitoring scenarios of different scales.