ABB P3EA HENF315216R1 Process controller module
SPECIFIC PARAMETERS
Brand ABB
Product Series P3 Series Process Controller
Product Type Industrial-grade High-performance Process Controller
Model P3EA HENF315216R1
Working Voltage 24VDC Wide Range Adaptation 19.2-28.8VDC
Working Temperature -40℃ to 70℃
Storage Temperature -55℃ to 85℃
Relative Humidity 5% to 95% Non-condensing (No Dew Formation)
Protection Level IP20 (Rail-mounted Installation)
Installation Method 35mm DIN Rail Installation
Processor Multi-core Industrial-grade CPU 1.0GHz Main Frequency
Memory Configuration 2GB DDR4 RAM 8GB eMMC Flash
Programming Environment ABB Automation Builder (Supports IEC 61131-3 Standard Programming Languages)
Control Cycle Minimum 0.1ms
Communication Interfaces 2 Gigabit Ethernet Ports (Supports TCP/IP, PROFINET, EtherNet/IP) 2 RS485 Serial Ports (Supports Modbus RTU) 1 CANopen Interface
I/O Expansion Capacity Supports Up to 32 S800I/O Modules Maximum 8192 I/O Points
Current Consumption Typical 300mA (24VDC) Maximum 450mA (24VDC)
Size 140mm×100mm×50mm (Length×Width×Height)
Weight 0.7kg
Power Consumption Typical 7.2W Maximum 10.8W
Certification Qualification CE UL CSA IEC 61010-1 IEC 61508 SIL 2 IEC 61850
Compatible System ABB AC 800M Control Systems S800I/O Distributed Modules SCADA Systems Industrial Ethernet Devices
Diagnostic Function Support Hardware Self-test Communication Fault Alarm I/O Module Status Monitoring Power Supply Fault Detection Program Operation Diagnosis
Anti-interference Level Complies with EN 55032/EN 61000 Industrial EMC Standards
MTBF (Mean Time Between Failures) ≥350,000 Hours
PRODUCT PERFORMANCE
Multi-core industrial-grade CPU with 1.0GHz main frequency, combined with 2GB DDR4 RAM, quickly processing complex process control logic and large-scale I/O data, with control cycle as low as 0.1ms, ensuring real-time response of control commands
Compatible with IEC 61131-3 standard programming languages, realizing integrated programming of process control, logic control and batch control through ABB Automation Builder, adapting to multi-scenario industrial control needs
Integrates multiple industrial protocol interfaces including Gigabit Ethernet, PROFINET, EtherNet/IP and Modbus, enabling seamless interconnection with distributed I/O modules, intelligent instruments and upper SCADA systems, improving system integration flexibility
Industrial-grade wide-temperature design, can operate stably in the temperature range of -40℃ to 70℃ and non-condensing humidity environment of 5%-95%, adapting to extreme industrial scenarios such as alpine and high temperature
Supports expansion of up to 32 S800I/O modules and maximum 8192 I/O points, covering the multi-area and multi-parameter control needs of medium and large-scale industrial plants
Built-in comprehensive self-diagnostic function, real-time monitoring of hardware status, communication connections and I/O module operation, fault information is intuitively fed back, facilitating rapid problem location and reducing operation and maintenance costs
24VDC wide-range power supply design, withstanding voltage fluctuations and transient sags, adapting to complex industrial power grid environments, ensuring continuous and stable power supply to the controller
Complies with IEC 61508 SIL 2 safety standard, can be applied to safety-related control systems to ensure the safety and controllability of industrial production processes
Modular design and 35mm DIN rail installation, facilitating system expansion and maintenance, and flexibly expanding the control range according to production needs
Supports remote programming, debugging and firmware upgrade, and equipment maintenance can be completed through the network without on-site attendance, improving operation and maintenance efficiency
Data transmission adopts encryption and verification mechanisms to prevent data leakage and tampering, ensuring the integrity of control command and monitoring data transmission
There are no reviews yet.