ABB 520PSD01 soft starter
¥10,000.00 Original price was: ¥10,000.00.¥7,500.00Current price is: ¥7,500.00.
The ABB 520PSD01 belongs to the PSD series of ABB soft starters and is specifically designed to meet the motor starting requirements in industrial environments. It achieves precise control of the starting voltage of the motor through the reverse - parallel connection of thyristors, thus realizing the smooth starting of the motor, effectively reducing the impact of the starting current on the power grid and the wear of mechanical equipment caused by the starting torque. This soft starter has a sturdy metal casing with good protection performance and can adapt to relatively complex industrial application scenarios. It is equipped with a clear LED display panel, which is convenient for operators to monitor the operating status of the equipment in real - time, and has a variety of built - in protection functions, greatly improving the reliability and safety of equipment operation.
wechatPhone 15359273787
Phone: 15359273787
Email: sales@zzhuie.com
connect：Mya
ABB 520PSD01 soft starter
Specific Parameters
- Rated Operating Voltage: Supports a variety of voltage levels such as three – phase 380V, 400V, 415V, 440V, 480V, 500V, 525V, 660V, 690V, etc., and can adapt to the voltage requirements of motors in different regions and application scenarios.
- Rated Current: Corresponding to different voltage levels, the rated current range is 75A – 840A. It can be accurately matched according to the actual motor power to ensure stable operation.
- Starting Time: The setting range is 0.5 – 60 seconds, which can be flexibly adjusted according to the load characteristics to achieve the best starting effect.
- Initial Voltage: It can be set within the range of 10% – 60% of the power supply voltage to meet different starting requirements and reduce the starting impact.
- Current Limiting Setting: The range is 2 – 5 times the rated current of the motor, effectively limiting the starting current and protecting the motor and the power grid.
- Stop Voltage Reduction Time: The setting range is 5 – 240 seconds, realizing the smooth stop of the motor and reducing the impact on the equipment.
Product Performance
- Excellent Starting Performance: It can significantly reduce the starting current of the motor, usually only 30% – 50% of the direct starting current, effectively reducing the burden on the power grid. At the same time, it smoothly increases the starting torque, avoiding excessive impact on mechanical equipment and extending the service life of the equipment.
- Complete Protection Functions: It has a variety of protection mechanisms such as overload protection, phase – loss protection, over – heat protection, and phase – sequence protection. When an abnormality occurs in the operation of the motor, the circuit can be quickly cut off to protect the motor and the soft starter itself, reducing the risk of failure.
- Simple and Intuitive Operation: Through the LED display panel, key information such as operating current and fault codes can be displayed in real – time. The operation buttons are reasonably arranged, easy to understand and operate, and convenient for users to set parameters and monitor the equipment.
- Strong Environmental Adaptability: The sturdy metal casing provides good protection performance and can work stably in an environment with a temperature range of – 25℃ – +50℃ and a relative humidity of 5% – 95% (non – condensing), suitable for a variety of complex industrial environments.
Product has been added to your cart
There are no reviews yet.